Share Your Requirements
For a Quick response, Please fill up the details below.
Top Products from Munish Engineers
VMC Machine Fixture
| Availability : In Stock |
| Material : Mild Steel |
| Rust Proof : Yes |
| Surface Treatment : Galvanized |
Cast Iron CNC Turning Fixture
₹ 25,000
| Availability : In Stock |
| Material : Cast Iron |
| Surface Treatment : Galvanized |
| Tensile Strength : 350 Mpa |
VMC Hydraulic Clamping Fixture
₹ 1,00,000
| Availability : In Stock |
| Material : Cast Iron |
| Surface Treatment : Galvanized |
| Tensile Strength : 200 - 400 Mpa |
Oil Pump Machine Fixture
₹ 40,000
| Availability : In Stock |
| Material Grade : SS 304 |
| Material : Stainless Steel |
| Technique : Hot Rolled |
Mild Steel CNC Turning Fixture
₹ 25,000
| Availability : In Stock |
| Material : Mild Steel |
| Surface Treatment : Anodizing or Hard Anodizing |
| Tolerance : 0.01mm |
VMC Fourth axis Fixture
| Availability : In Stock |
| Clamping Pressure : 5000psi |
| Material : Mild Steel |
| Rust Proof : Yes |
Stainless Steel Drilling Fixture
₹ 22,000
| Availability : In Stock |
| Design : Customized |
| Grade : SS304 |
| Material : Stainless Steel |
VMC Manual Clamping Fixture
₹ 30,000
| Availability : In Stock |
| Material : Mild Steel |
| Rust Proof : Yes |
| Surface Treatment : Galvanized |
Assembly Fixture
₹ 20,000
| Availability : In Stock |
| Material : Stainless Steel |
| Tensile Strength : 200 - 400 Mpa |
| Working Temperature : 20 to 120 degree C |
Special Purpose Drilling Machine, 220 V
| Availability : In Stock |
| Drilling Diameter (in mm) : 16 mm |
| Frequency (Hz) : 50 to 60 Hz |
| Operation Mode : Semi-Automatic |
Semi-Automatic Flex Arm Radial Drilling Machine
₹ 1,00,000
| Automatic Grade : Semi-Automatic |
| Availability : In Stock |
| Drilling Diameter (in mm) : 10 mm |
| Hole Diameter : 25-50 mm |
Leak Testing Machine
₹ 3,00,000
| Automation Grade : Semi-Automatic |
| Availability : In Stock |
| High pressure Leak Test : Upto 160 bar |
| Material : Stainless Steel |
Outer Ring Fixer
₹ 11,000
| Availability : In Stock |
| Diameter : 4 to 6 cm |
| Material : Mild Steel |
| Shape : Round |
SS Ring
| Availability : In Stock |
| Diameter : 15 to 25cm |
| Material Grade : SS302 |
| Material : Stainless Steel |
Lathe Chuck Hard Jaw
₹ 3,000
| Availability : In Stock |
| Jaw Type : Top Jaws |
| Material : Steel |
| Minimum Compatible Chuck Diameter : 12 inch |
Automatic Mild Steel PLC Control Panel
₹ 60,000
| Automatic Grade : Automatic |
| Availability : In Stock |
| Condition : New |
| Frequency : 50/60 Hz |
Single Phase Semi-Automatic Motor Starter Control Panel
₹ 60,000
| Automatic Grade : Semi-Automatic |
| Availability : In Stock |
| Light Indication : Yes |
| Material : Mild Steel |
Cast Iron Valve Body Drilling Jig
₹ 35,000
| Availability : In Stock |
| Coating : Rust-proof oil |
| Diameter : 20 to 35 cm |
| Material : Cast Iron |
FAQs On Munish Engineers
Where is Munish Engineers located?
The location of the Munish Engineers is No.5/8, kanngi Street, Visalakshi Nagar, Defence Colony, Ekkatuthangal, Chennai, Tamil Nadu 600032.
What is the GST Number of the Munish Engineers?
The GST Number of the Munish Engineers is 33AFQPK6363P1ZP.
What is the nature of the business of Munish Engineers?
The nature of the business of Munish Engineers is manufacturing.
What are the main categories in which Munish Engineers deals?
Munish Engineers specializes in a diverse range of categories, including Control Panel, Bearing Cages and Leak Test Machine.
Is Munish Engineers a verified manufacturer on Aajjo?
Yes, Munish Engineers is a verified and trusted manufacturer listed on Aajjo.
