Share Your Requirements
For a Quick response, Please fill up the details below.
Top Products from Tomer Engineering Works
Stainless Steel Air Ejector Pin
₹ 230
| Availability : In Stock |
| Diameter : 20mm |
| Finish : Polished |
| Material : Stainless Steel |
Mild Steel Bend Hitch Pin
₹ 150
| Availability : In Stock |
| Material : Mild Steel |
| Nominal Pipe Size : 2 inches |
| Shape : Round |
Stainless Steel Backing Flange
₹ 230
| Availability : In Stock |
| Finish : Polished |
| Material : Stainless Steel |
| Shape : Round |
Stainless Steel JCB Bush Oil Groove
₹ 150
| Availability : In Stock |
| Finishing : Polished |
| Inner Diameter : 45 mm |
| Material : Stainless Steel |
Mild Steel Gear Pin, For Used for gears
₹ 120
| Availability : In Stock |
| Material : Mild Steel |
| Shape : Round |
| Size : 2inch (Length) |
EN19 Steel Bevel Gear (100mm Module, Up to 100mm Outer Diameter) - As Machined
₹ 300
| Application : Gearbox, Automotive, Packaging, Conveyor, Machine Tool |
| Availability : In Stock |
| Gear Type : Bevel |
| Hardness : 50–58 HRC |
Mild Steel Plug End Cap, For Plumbing Pipe, 1 inch
₹ 150
| Availability : In Stock |
| Finish : Polished |
| Head Type : Round |
| Material : Mild Steel |
Ms Forged Elbow
₹ 100
| Availability : In Stock |
| Bend Angle : 90 degree |
| Country of Origin : Made in India |
| Nominal Size : 2 inch |
Mild Steel Ball, Diameter: 10 mm
₹ 250
| Availability : In Stock |
| Diameter : 10 mm |
| Finish : Polished |
| Material : Mild Steel |
Mild Steel Nut Bolt, Hot Dip Galvanized (HDG)
₹ 150
| Availability : In Stock |
| Finish : Hot Dip Galvanized (HDG) |
| Material : Mild Steel |
| Nominal Length : 80 mm |
Stainless Steel Ball Bearing cover
₹ 50
| Availability : In Stock |
| Finish : Polished |
| Inner Diameter : 25 mm |
| Material : Stainless Steel |
Mild Steel Thread Rod, For Construction, 4 inches
₹ 200
| Availability : In Stock |
| Finish : Polished |
| Material : Mild Steel |
| Shape : Round |
Mild Steel Roller Shaft
₹ 250
| Availability : In Stock |
| Diameter(mm) : 30 mm |
| Finishing : Polished |
| Material : Mild Steel |
Mild Steel Ceiling Fan Shafts
₹ 200
| Availability : In Stock |
| Finish : Polished |
| Material : Mild Steel |
| Shape : Round |
Mild Steel Table Fan Shaft
₹ 58
| Availability : In Stock |
| Finish : Polished |
| Material : Mild Steel |
| Shape : Round |
30 mm Mild Steel Caltric Water Pump Impeller Shaft
₹ 150
| Availability : In Stock |
| Length : 30 mm |
| Material : Mild Steel |
| Shape : Round |
Mild Steel Oil Seal Bush
₹ 200
| Availability : In Stock |
| Finish : Polished |
| Outer Diameter : 50mm |
| Product Material : Mild Steel |
Mild Steel NPT Threaded Flanges, Size: 7 inch
₹ 190
| Availability : In Stock |
| Finish : Polished |
| Material : Mild Steel |
| Shape : Round |
Mild Steel JCB Bush
₹ 130
| Availability : In Stock |
| Finish : Polished |
| Material : Mild Steel |
| Shape : Round |
FAQs On Tomer Engineering Works
Where is Tomer Engineering Works located?
The location of the Tomer Engineering Works is PLOT NO. A-24, DABUA EXTN. OPP. HARE RAM HARE KRISHNA DHRAMSHALA, DABUA PALI ROAD, Faridabad, Haryana, 121001.
What is the GST Number of the Tomer Engineering Works?
The GST Number of the Tomer Engineering Works is 06ADZPT2597H1ZL.
What is the nature of the business of Tomer Engineering Works?
The nature of the business of Tomer Engineering Works is manufacturing.
What are the main categories in which Tomer Engineering Works deals?
Tomer Engineering Works specializes in a diverse range of categories, including Cutting Dies, Pump Shafts and Ceiling Fan Shafts.
Is Tomer Engineering Works a verified manufacturer on Aajjo?
Yes, Tomer Engineering Works is a verified and trusted manufacturer listed on Aajjo.
