Share Your Requirements
For a Quick response, Please fill up the details below.
Top Products from Simran Machines
Used Vertical Injection Moulding Machine
₹ 8,00,000
| model : Used Vertical Injection Moulding Machine |
Used Plastic Injection Machine
₹ 4,00,000
| Coil Power Consumption : 0.9636 kwh |
| Energy Saving Ratio : 29 % |
| Energy Saving : 0.279 kwh |
| Frequency : 50-60 Hz |
120 Ton Used Injection Moulding Machines
₹ 6,00,000
| Material : Mild Steel |
| Modal : 120 Ton Used Injection Moulding Machines |
| Power : 4872 kcal/H |
| Voltage : 220 V |
230 Ton Hayabusa Injection Molding Machines
₹ 7,00,000
| model : 230 Ton Hayabusa Injection Molding Machines |
Kawaguchi Used Injection Moulding Machine
₹ 12,00,000
| Frequency : 50-60 Hz |
| Material : Mild Steel |
| Modal : Kawaguchi Used Injection Moulding Machine |
| Power : Electric |
Used Meiki Injection Moulding Machine
₹ 1,00,000
| Material : Mild Steel |
| Modal : Used Meiki Injection Moulding Machine |
| Power : Electric |
| Voltage : 220 V |
Sumitomo Used Injection Moulding Machine
₹ 5,00,000
| Clamping Force : 400 kN |
| Material : Mild Steel |
| Modal : Sumitomo Used Injection Moulding Machine |
| Power : Electric |
₹ 60,000
| Material : PLC |
| Model : PLC System |
| Mounting Type : PC Board |
| Power : 420 - 440 V |
Automatic Injection Moulding Machine
₹ 10,00,000
| Capacity : 80 Ton |
| Injection Pressure : 5 mpa |
| model : Automatic Injection Moulding Machine |
| Phase : Three Phase |
Kawaguchi 360 Injection Moulding Machine
₹ 16,00,000
| Capacity : 270 |
| model : Kawaguchi 360 Injection Moulding Machine |
| Power : 440 W |
Toyo Hydraulic Injection Moulding Machine
₹ 7,00,000
| model : Toyo Hydraulic Injection Moulding Machine |
Used 55 Ton Injection Moulding Machine
₹ 4,50,000
| Clamping Fore : 15 - 200 TF |
| Ejector Force : 45 - 280 kn |
| Frequency : 50-60 Hz |
| Injection Pressure : 150 - 250 MPa |
Used Sumitomo Electric Plastic Injection Moulding Machine
₹ 10,00,000
| Frequency : 50-60 Hz |
| Material : Mild Steel |
| Modal : Used Sumitomo Electric Plastic Injection Moulding Machine |
| Oil tank capacity(Litre) : 300 |
JSW 450 EII Used Injection Moulding Machines
₹ 24,00,000
| Frequency : 50-60 Hz |
| Material : Mild Steel |
| Modal : JSW 450 EII |
| Power : Electric |
Used Hishiya Hydraulic Injection Moulding Machine
₹ 10,00,000
| Clamping Way : Hydraulic & Mechanical Composite |
| Frequency : 50-60 Hz |
| Material : Mild Steel |
| Modal : Used Hishiya Hydraulic Injection Moulding Machine |
Used Mitsubishi Injection Moulding Machine
₹ 12,00,000
| Frequency : 50-60 Hz |
| Material : Mild Steel |
| Modal : Used Mitsubishi Injection Moulding Machine |
| Platen Size : 60.00 x 60.00 inch |
JSW 650 Ton Hydraulic Moulding Machine
₹ 35,00,000
| Clamping Force : 500-1000 ton |
| model : JSW 650 Ton Hydraulic Moulding Machine |
| Oil tank capacity(Litre) : 300 |
| Orientation : Vertical |
FAQs On Simran Machines
Where is Simran Machines located?
The location of the Simran Machines is KHASRA NO 302/2/2, GROUND FLOOR, SWAROOP NAGAR, GT KARNAL ROAD, NEW DELHI, North West Delhi, Delhi, 110042.
What is the GST Number of the Simran Machines?
The GST Number of the Simran Machines is 07ACTFS9570L1Z1.
What is the nature of the business of Simran Machines?
The nature of the business of Simran Machines is manufacturing.
What are the main categories in which Simran Machines deals?
Simran Machines specializes in a diverse range of categories, including PLC Control Panel, Plastic Injection Moulding Machine and Vertical Injection Moulding Machine.
Is Simran Machines a verified manufacturer on Aajjo?
Yes, Simran Machines is a verified and trusted manufacturer listed on Aajjo.
